مقالات
Journal Papers:
• Morteza Rezaei Larijani, M. Zolghadri, “Design and Implementation of an ADC-based Real-time Simulator along with an Optimal Selection of the Switch Model Parameters”, accepted to be published in the Journal of Electrical Engineering, SPRINGER
• ا. پایمزد، ح. صانعی و ز. نصیری قیداری، “مدلسازی ریزالور خطی با در نظر گرفتن اثر انتهایی طولی”، مجله علمی پژوهشی الکترومغناطیس کاربردی، مهر ماه 99
• M. Bahari, Z. Nasiri-Gheidari, and F. Tootoonhian, “Modeling, Performance Analyzing, and Prototyping of Variable Reluctance Resolver with Toroidal Winding”, IEEE Sensors Journal, early access
• H. Saneie, Z. Nasiri-Gheidari, F. Tootoonchian, and A. Daniar “Simplified Winding Arrangement for Integrated Multi-Turn Resolvers”, IEEE Transactions on Industrial Electronics, accepted for publication
• H. Lasjerdi, and Z. Nasiri-Gheidari, “A Comprehensive Analysis of Short-Circuit Fault in Wound-Rotor Resolvers”, IEEE Trans. On Vehicular Technology, early access
• H. Saneie, A. Daniar, and Z. Nasiri-Gheidari, “Design Optimization of a Low Speed Small Scale Modular Axial Flux Permanent Magnet Synchronous Generator for Urban Wind Turbine Application”, Scientia Iranica, early access
• S. Hajmohammadi, H. Saneie, Z. Nasiri-Gheidari and F. Tootoonchian, “Optimal Design and Performance Analysis of a Double-Sided Multi-Turn Wound-Rotor Resolver”, in IEEE/ASME Transactions on Mechatronics, doi: 10.1109/TMECH.2021.3066815
• H. Lasjerdi, Z. Nasiri-Gheidari, F. Tootoonchian, “Static Eccentricity Fault Diagnosis in Wound-Rotor Resolvers”, IEEE Sensors Journal, early access
• M. Bahari, Z. Nasiri-Gheidari, “The Comparative Analysis of AC-Flux and DC-Flux Resolvers”, Scientia Iranica, early access
• A. Paymozd, H. Saneie, Z. Nasiri-Gheidari, F. Tootoonchian, “Subdomain Model for Predicting the Performance of Linear Resolver Considering End Effect and Slotting Effect”, IEEE Sensors Journal, early access
• H. Lasjerdi, Z. Nasiri-Gheidari, F. Tootoonchian, “Online Static/Dynamic Eccentricity Fault Diagnosis in Inverter-Driven Electrical Machines using Resolver Signals”, IEEE Trans. On Energy Conversion, early access
• G. Rezazadeh, F. Tahami, G. Capolino, S. Vaschetto, Z. Nasiri-Gheidari, H. Henao, “Improvement of Concentrated Winding Layouts for Six-Phase Squirrel Cage Induction Motors”, IEEE Trans. On Energy Conversion, early access
• H. Saneie, and Z. Nasiri-Gheidari, “Performance Analysis of Outer-Rotor Single-Phase Induction Motor Based on Magnetic Equivalent Circuit (MEC)”, IEEE Transactions on Industrial Electronics, early access
• N Noroozi, M Yaghoubi, MR Zolghadri, “A Short-Circuit Fault Diagnosis Method for Three-Phase Quasi-Z-Source Inverters”, IEEE Transactions on Industrial Electronics, Vol 68, No 1, January 2021, pp 672-682
• H. Saneie, Z. Nasiri-Gheidari and F. Tootoonchian, “Structural Design and Analysis of a High Reliability Multi-Turn Wound-Rotor Resolver for Electric Vehicle”, IEEE Trans. on Vehicular Technology, vol.69, no. 5, pp. 4992-4999, 2020
• S. Haj-Mohammadi, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Influence of Different Installation Configurations on the Position Error of a Multi-Turn Wound-Rotor Resolver”, IEEE Sensors Journal, vol. 20, no. 11, pp. 5785 – 5792, June 2020
• R. Alipour-Sarabi, Z. Nasiri-Gheidari, and H. Oraee, “Development of a 3-D Magnetic Equivalent Circuit Model for Axial Flux Machines”, IEEE Transactions on Industrial Electronics, vol. 67, no. 7, pp. 5758 – 5767, July 2020
• S. Tavakoli, and Z. Nasiri-Gheidari, “Static Eccentricity Fault Diagnosis in a Cylindrical Wound-Rotor Resolver”, International Journal of Industrial Electronics, Control and Optimization, vol. 3, no.1, pp. 19-26, 2020
• H. Saneie, Z. Nasiri-Gheidari, and F. Tootoonchian, “Design and Prototyping of a Multi-Turn Sinusoidal Air-gap Length Resolver”, IEEE Trans. on Energy Conversion, vol. 35, no. 1, pp. 271 – 278, March 2020
• M. Bahari, A. Davoodi, H. Saneie, F. Tootoonchian, and, Z Nasiri-Gheidari, “A New Variable Reluctance PM-Resolver”, IEEE Sensors Journal, vol. 20, no. 1, pp. 135 – 142, Jan. 2020
• M. Ghasemian, F. Tahami, and Z. Nasiri-Gheidari, “Optimal design of a flux reversal permanent magnet machine as a wind turbine generator”, Turkish Journal of Electrical and Computer Sciences, vol. 28, pp. 693 – 707, 2020
• S.A. Hosseinipour, MR Zolghadri, “Effectiveness and Optimal Placement of Bidirectional Substations for Regenerative Braking Energy Recovery in Electrical Network of Metro System”, International Journal of Railway Research Vol 6 No. 2, 2019 pp 43-52
• A Komeijani, M. Zolghadri, S. Atashpar, G. Kebriyayi, “Optimal design of onboard energy storage systems with volume limitation for urban electrical rail transportation”, Vol 9, No. 3, Sept 2019 (7/1398) Energy Engineering & Management, Kashan University, IRAN (Persian)
• H. Saneie, Z. Nasiri-Gheidari, and F. Tootoonchian, “Accuracy Improvement in Variable Reluctance Resolvers”, IEEE Trans. on Energy Conversion, vol. 34, no. 3, pp. 1563 – 1571, Sept. 2019
• M. Bahari, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Proposal of Winding Function Model for Geometrical Optimization of Linear Sinusoidal Area Resolver”, IEEE Sensors Journal, vol. 19 no. 14, pp. 5506 – 5513, July 2019
• M. Mohammad-Yari, M. Safari, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Optimal Winding Selection for Wound-Rotor Resolvers”, Scientia Iranica, early access
• M. Rayati, S. Amirzadeh Goghari, Z. Nasiri-Gheidari, A.M. Ranjbar, “An optimal and decentralized transactive energy system for electrical grids with high penetration of renewable energy sources”, Electrical Power and Energy Systems, vol.113, pp. 850–860, 2019
• N. Noroozi, M. Yaghoubi, M. Zolghadri, “A modulation method for leakage current reduction in a three phase grid-tie quasi-Z-source inverter”, IEEE Transaction on Power Electronics, Vol 34, No, 6, June 2019, pp 5439-5450
• M. Alemi-Rostami, R. Alipour-Sarabi, G. Rezazadeh, Z. Nasiri-Gheidari, and H. Oraee, “Design Optimization of a Double-Stage Resolver”, IEEE Transactions on Vehicular Technology, vol. 68, no. 6, pp. 5407 – 5415, June 2019
• R. Alipour-Sarabi, Z. Nasiri-Gheidari, and H. Oraee, “Misconception of Total Harmonic Distortion in resolvers”, Electromechanical Energy Conversion Systems (EECS), vol. 1, no. 01, 38-43, 2019
• H. Lasjerdi, Z. Nasiri-Gheidari, F. Tootoonchian, “A Comprehensive Mathematical Model for Analysis of WR-Resolvers under Stator Short Circuit Fault”, Journal of Electrical and Computer Engineering Innovations, vol. 7, no. 1, pp. 11-18, 2019
• M. Yaghoubi, J. Shokrollahi Moghani, N. Noroozi, M. Zolghadri, “IGBT Open-Circuit Fault Diagnosis in a Quasi-Z-Source Inverter”, IEEE Transactions on Industrial Electronics, Volume: 66, Issue:4, April 2019, pp 2847-2856
• R. Alipour-Sarabi, Z. Nasiri-Gheidari, F. Tootoonchian, and H. Oraee, “Improved Winding Proposal for Wound Rotor Resolver Using Genetic Algorithm and Winding Function Approach”, IEEE Transactions on Industrial Electronic, vol. 66, no. 2, pp. 1325-1334, 2019
• F. Zare, Z. Nasiri-Gheidari, and F. Tootoonchian, “The effect of winding arrangements on measurement accuracy of sinusoidal rotor resolver under fault conditions”, Measurement, Elsevier, vol. 131, pp. 162-172, 2019
• N. Noroozi, M. Zolghadri, “Three-Phase Quasi-Z-Source Inverter With Constant Common-Mode Voltage for Photovoltaic Application”, IEEE Transactions on Industrial Electronics, Volume 65, Issue 6, 2018, pp 4790-4798
• H. Saneie, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Challenges of Finite Element Analysis of Resolvers”, IEEE Trans. On Energy Conversion, vol. 34, no. 2, pp. 973-983, 2018
• M. Ghods, Z. Nasiri-Gheidari, and H. Oraee, “Performance Analysis of Permanent Magnet Vernier Generator under Mechanical Faults”, International Journal of Industrial Electronics, Control and Optimization, vol. 1, no. 2, pp. 121-131, Sep. 2018
• F. Abolqasemi Kharanaq, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Magnetic Equivalent Circuit Model for Wound Rotor Resolver without Rotary Transformer’s Core”, IEEE Sensors J., vol. 18, no. 21, pp. 8693-8700, 2018
• M. Rayati, S. Amirzadeh Goghari, Z. Nasiri-Gheidari, and A. M. Ranjbar, “Robust and Dynamic Transactive Energy System Using Tsypkin-Polyak Theorem”, IET Smart Grid, vol. 1, no. 2, pp. 57-65, 2018
• A Daniar, Z Nasiri-Gheidari, F Tootoonchian, “Performance Analysis of Linear Variable Reluctance Resolvers Based on Improved Winding Function Approach”, IEEE Energy Conversion, vol. 33, no. 3, pp. 1422-1430, SEPTEMBER 2018
• M. Ghods, Z. Nasiri-Gheidari, F. Tootoonchian and H. Oraee, ” Design Improvement of a Small, Outer Rotor, Permanent Magnet Vernier Generator for Supplying Traffic Enforcement Camera”, IEEE Energy Conversion, vol. 33, no. 3, pp. 1213-1221, SEPTEMBER 2018
• M Shahbazi, M. Zolghadri, M. Khodabandeh, S. Ouni, “Fast Detection of Open-Switch Fault in Cascaded H-Bridge Multilevel Converter“, Journal of Scientia Iranica, Vol 25, Issue 3, May and June 2018, pp 1561-1570
• H. Saneie, Z. Nasiri-Gheidari, F. Tootoonchian, “Design-Oriented Modeling of Axial-flux Variable-reluctance Resolver Based on Magnetic Equivalent Circuits and Schwarz–Christoffel Mapping”, IEEE Transactions on Industrial Electronic, vol. 65, no. 5, pp. 4322-4330, May 2018
Confrence Papers:
• H. Lasjerdi, Z. Nasiri-Gheidari, and F. Tootoonchian “Condition Monitoring of Wound Rotor Resolvers”, 28th Iranian Conference on Electrical Engineering (ICEE), 2020, Tabriz, Iran
• M.S. KhajueeZadeh, Z. Nasiri-Gheidari, and F. Tootoonchian “Study of Noise and Vibration in Wound Rotor Resolvers”, 28th Iranian Conference on Electrical Engineering (ICEE), 2020, Tabriz, Iran
• ف. زارع، ز. نصیری قیداری، ف. توتونچیان، “بررسی تاثیر تعداد قطب و نوع سیمپیچی بر عملکرد ریزالور رلوکتانس متغیر رتور سینوسی”، اولین کنفرانس بین المللی موتور و ژنراتورهای الکتریکی، سبزه وار، ایران
• H. Lasjerdi, Z. Nasiri-Gheidari, and F. Tootoonchian “Proposal of an Analytical Model for Performance Evaluation of WR-Resolvers under Short Circuit Fault”, 27th Iranian Conference on Electrical Engineering (ICEE), 2019, Yazd, Iran, (selected as the best paper of conference)
• Manuchehr Fathi, MohammadReza Zolghadri, Saeed Ouni, Reza Babaloo, Post Fault Vector Control of an Induction Motor Fed by a CHB Inverter, Proceeding of the 10th International Power Electronics Drive Systems and Technologies Conference (PEDSTC2019), 12-14 Feb 2019, Shiraz, Iran
• Amirali Davoodi, Negar Noroozi, MohammadReza Zolghadri, A Fault-Tolerant Strategy for Three-Phase Dual Active Bridge Converter, Proceeding of the 10th International Power Electronics Drive Systems and Technologies Conference (PEDSTC2019), 12-14 Feb 2019, Shiraz, Iran
• A. Farhadi-Biranvand, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Selection of Excitation Signal Waveform for Improved Performance of Wound-Rotor Resolver”, PEDSTC 2019, Shiraz, Iran
• S. Hajmohammadi, R. Alipour-Sarabi, Z. Nasiri-Gheidari, and F. Tootoonchian, “Design Considerations of Multi-Turn Wound-Rotor Resolvers”, PEDSTC 2019, Shiraz, Iran
• G. Rezazadeh, S. Vaschetto, F. Tahami, GA. Capolino, H. Henao, Z. Nasiri-Gheidari, “Analysis of Six-Phase Induction Motor with Distributed and Concentrated Windings by Using the Winding Function Method”, 2018 XIII International Conference on Electrical Machines (ICEM), pp. 2423-2429, 2018
• M. Bahari, Z. Nasiri-Gheidari, “Longitudinal End Effect in a Variable Area Linear Resolver and its Compensating Methods”, 26th Iranian Conference on Electrical Engineering (ICEE), 2018, Mashhad, Iran
• M. Ghods, Z. Nasiri-Gheidari, F. Tootoonchian and A. Oraee, “Performance Evaluation of Permanent Magnet Vernier Generator Based on Modified Winding Function Method”, 26th Iranian Conference on Electrical Engineering (ICEE), 2018, Mashhad, Iran
• R. Alipour-Sarabi, Z. Nasiri-Gheidari, F. Tootoonchian and A. Oraee, F. Zare, “Linearized Resolver”, 26th Iranian Conference on Electrical Engineering (ICEE), 2018, Mashhad, Iran
• D. Sadeghpoor, I. Habibagahi, M. Zolghadri, M. AtarodiNon isolated, ZCT DC-DC converter for High Step-UP, High Efficiency Applications Using Resonant PWM Technique, Proceeding of the 9th International Power Electronics Drive Systems and Technologies Conference (PEDSTC2018), 13-15 Feb., Tehran, Iran
• F. Abolqasemi Kharanaq, Z. Nasiri-Gheidari, and F. Tootoonchian, “Analysis of Winding Arrangement on Position Error of Axial Flux Wound-Rotor Resolver”, PEDSTC 2018, Tehran, Iran
• G. Rezazadeh, M.Ghasemian, and Z. Nasiri-Gheidari, “Ultra Low Vibration and Low Acoustic Noise Multi-Stage Switched Reluctance Machine”, PEDSTC 2018, Tehran, Iran
• N. Noroozi, M. Zolghadri, M. Yaghoubi, Comparison of common-mode voltage in three-phase quasi-Z-source inverters using different shoot-through implementation methods, Proceeding of the 12th International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG 2018), Doha, Qatar, pp 1-6