[1] Karimi, Y., Oraee, H., Savabeghi, M., Vascus, J., and Guerrero, J.M., "Method for Load Sharing and Power Management in a Hybrid PV/Battery Source Islanded Microgrid", 7th Power Electronics, Drive Systems & Technologies Conference, PEDSTC, Tehran, Iran, 2016.
[2] Kaboli, SH., and Oraee, H., "Heat Trap Detection in the Stator Bar of Large Turbogenerators During Fault of Cooling Water Channels Blockage", 42nd IEEE Industrial Electronics Conference, IECON, Florence, Italy, October 2016.
[3] Karimi, Y., Guerrero, J.M., and Oraee, H., "Decentralized Method for Load Sharing and Power Management in a Hybrid Single/Three Phase Islanded Microgrid Consisting of Hybrid Source PV/Battery Units", IEEE Energy Conversion Congress, ECCE, Milwaukee, WI, USA, September 2016.
[4] Akbari, R., Ebrahimi, S.M., Tahami, F., and Oraee, H., "Plug-In Hybrid Electric Vehicle Battery Charger with Soft-Switched Dual-Bridge Resonant Converter for Smart Grid Applications", Accepted for Presentation at 7th International Symposium on Power Electronics for Distributed Generation Systems, PEDG, Vancouver, Canada, June 2016.
[5] Ghaffarpour, A., Barati, F., and Oraee, H., "Implementation of Direct Torque Control Method on Brushless Doubly Fed Induction Machines in Unbalanced Situations", 7th Power Electronics, Drive Systems & Technologies Conference, PEDSTC, Tehran, Iran, 2016.
[6] Ghaffarpour, A., Barati, F., and Oraee, H., "Direct Torque Control of Brushless Doubly Fed Machines", International Conference on New Research in Electrical Engineering and Computer Science, Tehran, Iran, 2015.
[7] Ouni, S., Ulloa Schmeisser, A., Zolghadri, M., Oraee, H., Rodriguez, J., and Lezana, P., "A Decision Algorithm to Select a Proper Control Method for a Cascaded Multilevel Inverter under Faulty Condition", 41st Annual Conference of the IEEE Industrial Electronics Society, IECON, Yokohama , Japan, November 2015.
[8] Sharifan, Sh., Ebrahimi, S.M., Oraee, A., and Oraee, H., "Performance Comparison Between Induction Motor and Brushless PM Motor for Hybrid Electric Vehicle Applications", IEEE International Aegean Conference on Electrical Machines and Power Electronics,Turkey, September 2015.
[9] Ouni, S., Khodabandeh, M., Zolghadri, M.R., Rodriguez, J., and Oraee, H., "A Reduced Switch Cascaded Transformer Multi Level Inverter", 15th IEEE International Conference on Environment and Electrical Engineering, EEEIC, Rome, Italy, June 2015.
[10] Ouni, S., Rodriguez, J. Shahbazi, M. Zolghadri, M., Oraee, H. Lezana, P. and Ulloa Schmeisser, A. , " A fast and simple method to detect short circuit fault in cascaded H-bridge multilevel inverter " , IEEE International Conference on Industrial Technology ,ICIT, Seville, Spain, March 2015.
[11] Ghaffarpour, A., Ghaffarpour, R., Oraee, A., and Oraee, H., "A New Demagnetization Approach for DC-DC Forward Converters " , Power Electronics Technologies Conference, Tehran, Iran, March 2015.
[12] Khomeiri Sani, R., and Oraee, H., "Optimal Selection of Generator for Wind Farms", 1st National Conference on Renewable and Clean Energy Management, Hamedan, Iran, 2014.
[13] Ebrahimi, S., Taghavi, M., Tahami, F., and Oraee, H., "A Single-Phase Integrated Bidirectional Plug-In Hybrid Electric Vehicle Battery Charger" 40th IEEE Industrial Electronics Society Conference, IECON, USA, November 2014.
[14] Mani, S., and Oraee, H., "An Availability Evaluation Approach for DFIG Wind Turbines Considering Subcomponents Reliability", 2nd Iran Wind Energy Conference, IWEC, Tehran, Iran, April 2014
[15] Khazaeli Moghadam, F., Karimi Khozani, H., Ebrahimi, M., Boroshki, M., and Oraee, H., "Optimal Control of DFIG under Unbalance Voltage Conditions", 2nd Iran Wind Energy Conference, Iran, April 2014.
[16] Ebrahimi, M., Tahami, F., Taghavi, M., and Oraee, H., "Integrated Bidirectional Isolated Soft-Switched Battery Charger for Vehicle-to-Grid Technology Using 4-Switch 3Φ-Rectifier", 39th IEEE Industrial Electronics Society Conference, IECON, Vienna, November 2013.
[17] Ouni, S., Noroozi, N., Shahbazi, M., Zolghadri, M.R., and Oraee, H., "A New Fault Tolerant Scheme for Cascaded H-Bridge Multilevel Converter", 3rd International Conference on Electric Power and Energy Conversion Systems, EPECS, Istanbul, Turkey, October 2013.
[18] Khazaeli Moghaddam, F., Gorginpour, H., Hajbabaei, A., Ouni, S., and Oraee, H., “Design and Implementation of Current based Vector Control Model of Brushless Doubly Fed Induction Generator", 3rd International Conference on Electric Power and Energy Conversion Systems, EPECS 2013, Istanbul, October 2013.
[19] Najmi, V., Ebrahimi, S.M, Sharifan, S., and Oraee, H., "A novel ZVS-ZCS boost converter with an h- bridge auxiliary LCC resonant circuit," IEEE International Conference on Power and Energy (PECon), Malaysia, December 2012.
[20] Ebrahimi, S.M., Tahami, F., and Oraee, H., " An Integrated Bidirectional Isolated Soft-Switched PHEV Battery Charger”, 27th International Power System Conference, PSC, Iran, November 2012.
[21] Najmi, V., Ebrahimi, S.M, and Oraee, H., "Output voltage quality intensification of diode clamped multilevel inverters using FM PWM technique", 3rd Power Electronics, Drive Systems and Technologies Conference, PEDSTC, Iran, Feburary 2012.
[22] Saket, A., Jandaghi, B., Moghadami, M., and Oraee, H., “Thermal Lumped Parameter Modeling of a Toroidal Transformer", 3th Electric Power Engineering & Control Systems (EPECS), Ukraine, November 2011.
[23] Ebrahimi, S.M., Najmi, V., Ebrahimi, S.Y., and Oraee, H., "A ZVS-resonant bifilar drive circuit for SRM with a reduction in stress voltage of switches", International Aegean Conference on Electrical Machines and Power Electronics, ACEMP, Turkey, September 2011 .
[24] Gorginpour, H., Jandaghi, B., Saket, M.A., Oraee, A., and Oraee, H., " Magnetic Field Harmonic Analysis in Brushless Doubly Fed Machine", 3rd Intarnational Youth Conference on Energetics, IYCE, Portugal, July 2011.
[25] Gorginpour, H., Jandaghi, B., Oraee, A., and Oraee, H., " Harmonic Analysis of Brushless Doubly Fed Machine", 3rd Intarnational Youth Conference on Energetics, IYCE, Portugal, July 2011.
[26] Ahmadian, M., Oraee, A., Jandaghi, B., Gorginpour, H., and Oraee, H., " Eddy Current Losses in Brushless Doubly Fed Machines", 3rd Intarnational Youth Conference on Energetics, IYCE, Portugal, July 2011.
[27] Jandaghi, B., Gorginpour, H., Oraee, A., Ahmadian, M., and Oraee, H., " A Survey on Rotor Faults in Brushless Doubly Fed Machines", 3rd Intarnational Youth Conference on Energetics, IYCE, Portugal, July 2011.
[28] Gorginpour, H., Oraee, A., Jandaghi, B., Ahmadian, M., and Oraee, H., " Reduction of the Torque Ripple in Brushless Doubly Fed Machines", 3rd Intarnational Youth Conference on Energetics, IYCE, Portugal, July 2011.
[29] Gorginpour, H., Jandaghi, B., and Oraee, H., "Time and Space Harmonics in Brushless Doubly-Fed Machine", 19th Iranian Conference on Electrical Engineering, ICEE, Iran, May 2011.
[30] Jandaghi, B., Barati, F., Gorginpour, H., and Oraee, H., "Optimal Converter Rating for Brushless Doubly Fed Machines", 26th International Power System Conference, PSC, Iran, 2011.
[31] Gorginpour, H., Jandaghi, B., and Oaree, H., " Finite Element Analysis of Brushless Doubly Fed Machine Under Stator Winding Faults", 2nd Power Electronics, Drive Systems & Technologies Conference, PEDSTC, Iran, February 2011.
[32] Sotoodeh, P., Gorgin, H., and Oraee, H., " Modeling of a BDFM-Based Wind Turbine Under Unbalanced Grid Voltage Dips", Power and Energy Conference, Illinois, USA, 2011.
[33] Gorginpour, H., Sotoodeh, P., and Oaree, H., " Dynamic Model for Brushless Doubly-Fed Machine with Stator Winding Faults ",1st Power Electronics & Drive Systems & Technologies Conference, PEDSTC’2010, Iran, 2010.
[34] Ahmadian, M., Jandaghi, B., Oraee, H., and Oraee, A., " Stator Currents for Maximum Torque per Ampere of BDFM ", 2nd International Conference of Young Scientists, Ukraine, November 2010.
[35] Ahmadian, M., Jandaghi, B., Oraee, H., Oraee, A., and Sotodeh, P., " Economic Comparison of BDFG and Conventional Generators in Wind Turbine Applications", 2nd International Conference of Young Scientists, Ukraine, November 2010.
[36] Gorgin, H., Oraee, H., Ghaedi, A., and Khaleghi, M., " The Effects of Skewing on Torque Ripple in Brush Doubly-Fed Machines ", 24th International Power System Conference, PSC-2009, Iran, 2009, (in Persian).
[37] Sheikhi, A., Oraee, H., Kaboli, SH., and Dorkhah, M., " A new Configuration of Switched Reluctance Motor for Reducing the Torque Ripple ", The 4th International Conference on Power Electronics, Machines and Drives, EPECS, United Arab Emirates, 2009.
[38] Barati, F., Oraee, H., Abdi, E., McMahon, R., and Shao, Sh., " Development of a Vector Model for Brushless Doubly–Fed Machine Considering all Loops in each Rotor Nest ", 24th International Power System Conference, PSC, Tehran, Iran, 2009.
[39] Ghafoori Fard, H., Oraee, H., and Kaboli,S.," A new Definition for Total Harmonics Distotion in Inverter-Fed Induction Motors Including Loss Considerations ", CIGRE, 2008.
[40] Barati, F., Oraee, H., Abdi, E., and McMahon, R., " The brushless doubly-fed machine vector model in the rotor flux oriented reference frame ", IEEE IECON, Orlando, Florida, USA, November 2008.
[41] Barati, F., Oraee, H., Abdi, E., and McMahon, R., " Derivation of a vector model for a brushless doubly-fed machine with multiple loops per nest ", IEEE ISIE, Cambridge, UK, June 2008.
[42] Kaboli, S., Moayedi, A., and Oraee , H., " Application of random PWM technique for reducing the high frequency harmonics in Class-D apmplifiers ", The 4th IET International Conference on Power Electronics, Machines and Drives, PEMD, UK, April 2008.
[43] Kaboli, S., Alavi, S.M.H., and Oraee , H., " Skip cycle controlled resonant converter with high efficiency over wide load range ", The 4th IET International Conference on Power Electronics, Machines and Drives, PEMD, UK, April 2008.
[44] Abdi, E., and Oraee , H., " Wind Power Industry , Status and Trends ", 1st Energy Optimization Conference, Iran, July 2007.
[45] Gholami, A., Zamani, R., and Oraee, H., "Comparison of Optimal Flux Search Techniques for DTC Based Induction Motor Drives", IEEE-IEMDC 2007, Turkey, May 2007.
[46] Arabian, H., Oraee, H., and Abdi, E., "Brushless Doubly-Fed Generator (BDFM): The New Generation of Wind Turbine Generators", First International Energy Conference, Mashhad, Iran, 2006.
[47] Gholami, A., Zamani, R., and Oraee, H., "Two Fast Optimal Search Techniques for DTC Based Induction Motor Drives", International Conference on Power Electronics, Drives and Energy Systems, PEDES-2006, India, December 2006.
[48] Zamani, R., Gholami, A. and Oraee, H., "Loss minimization in field controlled induction drives using optimum flux search algorithm", 21st International Power System Conference, PSC-2006, Iran, November 2006, (in Persian).
[49] Oraee, H., Fotouhi-Firouzabad, M., and Molaei, M., " Morkov model of drive motor system for reliability calculations ", IEEE- ISIE Conference, Canada, July 2006 .
[50] Aghajani, A., and Oraee, H., "A new PWM algorithm for sensorless control of brushless DC motors", 14th Iranian Conference on Electrical Engineering, ICEE- 2006, Iran, May 2006, (in Persian).
[51] Tahami, F., Shojaee, A., Oraee, H., and Ahmadi, D., "Adaptive control of induction motors capable of withstanding sensors error using fuzzy logic", 14th Iranian Conference on Electrical Engineering, ICEE- 2006, Iran, May 2006, (in Persian).
[52] Oraee, H., Kaboli, Sh., and Saghaleini, M., "About Derating Factor for Inverter-Fed Induction Motors", 6th International Conference on Power Electronics and Drive Systems, PEDS-2005, Malaysia, November 2005.
[53] Hedayati, M., and Oraee, H., "Assessment Study of Shunt FACTS Devices for Improving Dynamic Behavior of Induction Motors", 6th International Conference on Power Electronics and Drive Systems, PEDS-2005, Malaysia, November 2005.
[54] Oraee, H., and Lotfjou, A., "A Scholastic Approach in Modelling of Inductive Cylindrical Shaped Sensors for Current measuring", PSCC-2005, Belgium, August 2005.
[55] Samadi, H.R., and Oraee, H., "Optimal Design of Switching Converter Transformers with Ferrite Core", 5th IASTED International Conference on Power and Energy Systems, Euro PES - 2005, Spain, June 2005.
[56] Oraee, H., and Asghari, B., "Energy Efficient Vector Control Drive with Iron Loss Compensation", 5th IASTED International Conference on Power and Energy Systems, Euro PES- 2005, Spain, June 2005.
[57] Oraee, H., Saghaleini, M., and Kheiri, A., "Field Investigation of the effects of Load Mismatch in Electric Motors Energy Consumption", 5th National Energy Congress, Iran, May 2005, (in Persian).
[58] Oraee, H., Lotfjou, A., and Varahram, M.H., "Using Cylindrical Inductive Shaped Sensors for High Voltage Current Measurement", 10th Conference on Electrical Power Distribution Network, Iran, May 2005, (in Persian).
[59] Lotfjou, A., and Oraee, H., "Modeling of Inductive Sensors for Current Measurement at High Voltage", 13th Iranian Conference on Electrical Engineering, ICEE-2005, Iran, May 2005, (in Persian).
[60] Asghari, B., and Oraee, H., "Determination of optimal flux in vector control of induction motors for energy optimization", 6th Power System Conference, PSC-2004, Iran, October 2004, (in Persian).
[61] Asghari, B., and Oraee, H., "Optimal design of three phase induction motor vector controller including core loss", 1st Students Conference on Electrical Engineering, SCEES- 2004, Iran, October 2004, (in Persian), [Winner of the best paper award].
[62] Oraee, H., and Lotfjoo, A., "Harmonics and their effects on performance of induction motors", 7th Iranian Students Conference on Electrical Engineering, ISCEE- 2004, Iran, August 2004, (in Persian).
[63] Oraee, H., and Lotfjoo, A., "Study of Harmonic Effects on Performance of Induction Motors", 8th WSEAS International Conference, CSCC 2004, Greece, July 2004.
[64] Naghashan, M.R., Oraee, H., and Hekmat-Shoaar, "Investigation of the effects of blockage of stator winding coolant pipes on generator rated load", 18th International Power System Conference, PSC-2004, Iran, October 2003, (in Persian).
[65] Zarghami, M., and Oraee, H., "A frequency dependent root matching scheme in electromagnetic transient analysis", 5th Power System Seminar, Iran, October 2003.
[66] Oraee, H., Aarefi, A., Valley, P., and Abdi-Jalebi, E., "Comparison of Different Drives in Servo Systems", 38th Universities Power Engineering Conference, UPEC-2003, Greece, September 2003.
[67] Abdi-Jalebi, E., and Oraee, H., "Application of Lagrange Method in Optimal Design of Toroidal Transformers", 38th Universities Power Engineering Conference, UPEC-2003, Greece, September 2003.
[68] Oraee, H., and Abdi-Jalebi, E., "Optimal Design of Toroidal Transformers Using Lagrange Method", 11th International Conference on Electrical Engineering, ICEE-2003, Iran, May 2003, (in Persian).
[69] Oraee, H., Ghassab-Zadeh, A., LotfJoo, A. and Sorouri, I., "Measurement of Harmonics in an Industrial Plant and the Effects on Induction Motor Losses" , 8th Electric Power Distribution Conference, PDC-2003, Iran, April 2003, (in Persian).
[70] Oraee, H., Abdi, E., Sadeghi, M., and Moaber, K., "Design of a Robust Voltage Regulator for Vehicle Applications", Iranian Student Conference on Electrical Engineering, ISCEE-2002, Iran, 2002, (in Persian).
[71] Esmi-Jahromi, M., and Oraee, H. "Thermal Analysis of a Reluctance Machine Using Thermal Modeling and Finite Element Method" 17th International Power System Conference, PSC-2002, Iran, October 2002, (in Persian).
[72] Oraee, H., Fattahi, A., and Niknam, T., "Optimal Reactive Planning in Harmonic Power Systems by Genetic Algorithm", 17th International Power System Conference, PSC-2002, Iran, October 2002, (in Persian).
[73] Farmani, I., and Oraee, H., "Energy Efficient Electric Motors, A Tool for Demand– Side Management", 17th International Power System Conference, PSC-2002, Iran, October 2002, (in Persian).
[74] Aarefi, A. , Abdi, E., Zolghadri, M.R. and Oraee, H., "Design of an Optimal Robust Position Controller for IPMSM", 37th International Universities Power Engineering Conference, UPEC-2002, UK, September 2002.
[75] Aarefi, A., Abdi, E., Zolghadri, M.R., and Oraee, H., "Design of a Robust Position Controller for IPMSM by Hybrid Fuzzy Control and Maximum Torque per Input Current", 10th International Power Electronics and Motion Control Conference, EPE-PEMC 2002, Croatia, September 2002.
[76] Oraee, H., Kaboli, S. and Filizadeh. S., "Thermal Behavior of a Toroidal Transformer through a Mixed Model", 15th International Conference on Electrical Machines, ICEM-2002, Belgium, August 2002.
[77] Zarghami, M. and Oraee, H. , "A Frequency- Dependent Root-Matching Scheme in Electromagnetic Transient Analysis", 2nd IASTED International Conference, Euro PES- 2002, Greece, June 2002.
[78] Oraee, H., Filizadeh, S. and Kaboli, S., "Experimental setup for thermal analysis of three-phase electric motors", IASTED International Conference on Power and Energy Systems, PES-2002, USA, May 2002.
[79] Amini-Valashani, S., Oraee, H., and Jamei, M., "Optimization of Brushed PMDC Motors Using Fuzzy Logic", 10th International Conference on Electrical Engineering, ICEE-2002, Iran, May 2002, (in Persian).
[80] Aarefi, A., Abdi, E., Zolghadri, M.R. and Oraee, H., "Design of a Robust Position Controller for Synchronous Servo Motors Using a Fuzzy Control Method", 10th International Conference on Electrical Engineering, ICEE-2002, Iran, May 2002, (in Persian).
[81] Aarefi, A., Abdi, E., Zolghadri, M.R. and Oraee, H., "Design of a Robust Fuzzy Position Controller for PMSM", 10th Iranian Conference on Electrical Engineering, ICEE-2002, Iran, May 2002, (in Persian).
[82] Amini, S., Oraee, H. and Jamei, M., "Optimal Design of Brushed PMDC Motors Using Fuzzy Logic", 10th Iranian Conference on Electrical Engineering, ICEE-2002, Iran, May 2002, (in Persian).
[83] Farmani, I. and Oraee, H., “Thermal modelling of three-phase, squirrel-cage induction
motors”, 16th International Power System Conference, PSC-2001, Iran, October. 2001, (in Persian).
[84] Oraee, H. and Filizadeh, S., “The Impact of Harmonic Orders on Insulation Aging in Electric Motors”, 36th Universities Power Engineering Conference, UPEC-2001, UK, September. 2001.
[85] Iranian Conference on Electrical Engineering, ICEE-2001, Iran, May 2001 (in Persian).
[86] Oraee, H., “Application of fuzzy logic in optimal design of toroidal transformers”, Canadian Conference on Electrical and Computer Engineering, CCECE’97, Canada, May 1997.
[87] Oraee, H., “A new approach for the analysis of magnetic field distribution in PM motors”, Canadian Conference on Electrical and Computer Engineering, CCECE’97, Canada, May 1997.
[88] Oraee, H., “Investigation of the importance of electric motors energy consumption”,
The First National Energy Symposium, Vol. 3, Iran, May 1997.
[89] Oraee, H., “Practical Design of Brushed DC Permanent Magnet Motors”, Universities Power Engineering Conference, UPEC-96, Greece, September. 1996.
[90] Oraee, H., “On-line Determination of Interturn Voltage Failures in Electrical Machine Windings”, International Conference on Electrical Machines, ICEM’96, Spain, September. 1996.
[91] Oraee, H., “Computation of skin effect factors in cage induction motors”, Universities Power Engineering Conference, UPEC-95, UK, September. 1995.
[92] Oraee, H., “Modeling of Induction Motors Including Saturation Effects”, Universities Power Engineering Conference, UPEC-95, UK, September. 1995.
[93] Oraee, H., “The Influence of Rotor Cage on Performance of Three Phase Induction Motors”, Stockholm Power Tech., Sweden, June 1995.
[94] Oraee, H., “The Influence of Design Parameters on Performance of Single Phase Motors”, Mediterranean Electrotechnical Conference, melecon’94, Turkey, April 1994.
[95] Oraee, H., “A PC based package for analysis of electrical machine windings under transient conditions”, International Symposium on Electromagnetic Fields in Electrical Engineering, ISEF’93, Poland, September. 1993.
[96] Oraee, H., “A simplified method for computer-aided design of single-phase induction motors”, Universities Power Engineering Conference, UPEC-93, UK, September. 1993.
[97] Oraee, H., “Provision of Manpower for Successful Transfer of Technology”, Science & Technology in Third World Development, UK, April 1993.
[98] Oraee, H., “Simulation of Induction Machines Including Non-Linear Effects”, American Power Conference, USA, April 1993.
[99] Oraee, H., “The influence of design parameters on the performance of 3-phase induction motors”, Universities Power Engineering Conference, UPEC-92, UK, September. 1992.
[100] Oraee, H., “Determination of high frequency parameters of electrical machine windings”, International Aegean Conference on Electrical Machines and Power Electronics, Turkey, May 1992.
[101] Oraee, H., “Modeling of motor stator winding under surge conditions”, Universities Power Engineering Conference, UPEC-91, UK, September. 1991.
[102] Oraee, H., “Prediction of Transient Behavior of Electrical Machine Windings”, Mediterranean Electrotechnical Conference, melecon’91, Yugoslavia, May 1991.
[103] Haerian, A. and Oraee, H., “Industrial Renovation of Post-War Iran: The Need for Planning”, International Conference on North-South Cooperation in Science, Technology and Development, UK, April 1990.
[104] Oraee, H., “Modes of propagation for steep fronted incident surges in the line-end coils of electrical machines”, International Symposium on Electromagnetic Fields in Electrical Engineering, ISEF’89, Poland, September. 1989.
[105] Oraee, H., “Propagation of Surges in Stator Windings of Large AC Motors”, Mediterranean Electrotechnical Conference, melecon’89, Portugal, 1989.
[106] Oraee, H. and McLaren, P. G., “A Survey of Insulation Failures in Large AC Machines”, Universities Power Engineering Conference, UPEC-85, UK, April 1985.
[107] Oraee, H. and McLaren, P. G. “Interturn voltage stress in electrical machine windings due to fast switching surges”, Conference on Electrical Insulation and Dielectric Phenomenon, CEIDP, USA, October. 1984.
[108] Oraee, H. and McLaren, P. G. “Surge Voltage Distribution in High Voltage Induction Motor Windings”, Universities Power Engineering Conference, UPEC-84, UK, April 1984.
[109] Oraee, H. and McLaren, P.G. “Voltage distribution in line-end coils of machines subjected to steep fronted surges”, Universities Power Engineering Conference, UPEC-83, UK, April 1983.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Sharif University Of Technology
Department of Electrical Engineeirng Sharif University of Technology
Office: 6th Room - 624
Tel: (+98 21) 66165940
Fax: (+98 21) 66023261
Email: Oraee@sharif.ir