[1] R.Alipour-Sarabi, Z.Nasiri-Gheidari and H. Oraee,"Development of a Three-Dimensional Magnetic Equivalent Circuit Model for Axial Flux Machines," in IEEE Transactions on Industrial Electronics , Vol. 67, No. 7, July 2020, pp, 5758-5767.
[2] M. Alemi-Rostami, R. Alipour-Sarabi, G. Rezazadeh, Z. Nasiri-Gheidari and H. Oraee, "Design Optimization of a Double-Stage Resolver", in IEEE Transactions on Vehicular Technology, Vol. 68, No. 6, , June 2019, pp. 5407-5415.
[3] R. Alipour-Sarabi, Z. Nasiri-Gheidari, F. Tootoonchian and H. Oraee, "Improved Winding Proposal for Wound Rotor Resolver Using Genetic Algorithm and Winding Function Approach", in IEEE Transactions on Industrial Electronics, Vol. 66, No. 2, Feb 2019, pp. 1325-1334.
[4] R. Alipour-Sarabi, Z. Nasiri-Gheidari and H. Oraee, "Development of a 3-D Magnetic Equivalent Circuit Model for Axial Flux Machines", in IEEE Transactions on Industrial Electronics.?
[5] Ghoda, M., Nasiri-Gheidari, Z., and Oraee, H., "Performance Analysis of Permanent Magnet Vernier Generator under Mechanical Faults ", IECO Journal, Vol. 1, No. 2, September 7 , 2018, pp. 121 – 131.
[6] Alipour-Sarabi, R., Nasiri-Gheidari, Z., Tootoonchian, F., and Oraee, H., “Performance Analysis of Concentrated Wound-Rotor Resolver for Its Applications in High Pole Number Permanent Magnet Motors “, IEEE Sensors Journal, Vol. 17, No. 23, December 10 , 2017, pp. 7877 - 7885.
[7] Alipour-Sarabi, R., Nasiri-Gheidari, Z., Tootoonchian, F., and Oraee, H., “Analysis of Winding Configurations and Slot-Pole Combinations in Fractional-Slots Resolvers “, IEEE Sensors Journal, Vol. 17, No. 14, July15, 2017, pp. 4420-4428.
[8] Karimi, Y., Oraee, H., and Guerrero, J. M., “Decentralized Method for Load Sharing and Power Management in a Hybrid Single/Three-Phase-Islanded Microgrid Consisting of Hybrid Source PV/Battery Units”, IEEE Transactions on Power Electronics, Vol. 32, No. 8, August 2017, pp. 6135-6144.
[9] Alipour-Sarabi, R., Nasiri-Gheidari, Z., Tootoonchian, F., and Oraee, H., “Effects of Physical Parameters on the Accuracy of Axial Flux Resolvers”, IEEE Transactions on Magnetics, Vol. 53, No. 4, April 2017, pp. 1-11.
[10] Karimi, Y., Oraee, H., Golsorkhi , M., and Guerrero, J.M., “Decentralized Method for Load Sharing and Power Management in a PV/Battery Hybrid Source Islanded Microgrid”, IEEE Transactions on Power Electronics, Vol.pp, No.99, 2016.
[11] Ghazizadeh, M., Faiz, J., and Oraee, H., “Derating of Distribution Transformers under Non-linear Load Using a Combined Analytical-Finite Elements Approach”, IET Electric Power Applications, June 2016, pp.1-9.
[12] Taghipour, S., Abedini, A., Oraee, A., and Oraee, H., “Approach for Analytical Modelling of Axial-flux PM Machines”, IET Electic Power Applications, Vol.10, Issue 6, July 2016, pp.441-450.
[13] Mani, S., Oraee, A., and Oraee, H., “Spare Parts Management Algorithm for Wind Farms Using Structural Reliability Model and Production Estimation”, IET Renewable Power Generation, 2016, pp.1-7.
[14] Ebrahimi, S.M., Akbari, R., Tahami, F., and Oraee, H., “An Isolated Bidirectional Integrated Plug-in Hybrid Electric Vehicle Battery Charger With Resonant Converters”, Journal of Electric Power Components and Systems, Taylor & Francis Group, Vol.44, Issue 12, 2016.
[15] Sharifan, Sh., Ebrahimi, S.M. , Safaeian, R., and Oraee, H., “A Proper Power Ratio Selection for Electric and Combustion Motors in Hybrid Parallel Electric Vehicles”, Journal of International Review of Automatic Control, IREACO, Vol. 8, No. 4, July 2015.
[16] Faiz, J. ,Ghazizadeh, M., and Oraee, H., “Derating of Transformers Under non-linear Load Current and Non-sinusoidal Voltage– an overview”, IET Electric Power Applications, Vol.9, No.7, July 2015.
[17] Tohidi, S., Oraee, H., Zolghadri, M.R., and Tavner, P.J., “Influence of Different Series Dynamic Resistors on Low-voltage Ride-through of Brushless Doubly Fed Induction Generator”, Electeric Power Components and Systems, Vol.43, June 2015.
[18] Ameli, A., Farrokhifard M.R ., Davari-nejad, E., and Oraee, H., “Profit-Based DG Planning Considering Environmental and Operational Issues: A Multiobjective Approch”, IEEE Systems Journal, Issue 99, May 2015.
[19] Sharifan, Sh., Ebrahimi, S.M. , Safaeian, R., and Oraee, H., “Comparison and Performance Analysis of Different Electric Motors and Optimal Motor Selection for Hybrid Electric Vehicles”, International Journal on Engineering Applications, IREA, Vol. 3, No. 3, May 2015.
[20] Khodaparastan, M. , Vahedi, H. ; Khazaeli, F. and Oraee, H., “A Novel Hybrid Islanding Detection Method for Inverter-based DGs Using SFS and ROCOF”, IEEE Transactions on Power Delivery, Vol.PP, Issue 99, February 2015.
[21] Gorginpour, H., Oraee, H., and Abdi, E., “Calculation of Core and Stray Load Losses in Brushless Doubly Fed Induction Generators”, IEEE Transaction on Industrial Electronics, Vol.61, No.7, July 2014, pp. 3167-3177.
[22] Tohidi, S., Tavner, P., McMahon, R., Oraee, H., Zolghadri, M.R., Shao, S., and Abdi., E., “Low voltage ride-through of DFIG and brushless DFIG: Similarities and differences”, Electric Power System Research, Vol.110, May 2014, pp. 64-72.
[23] Gorginpour, H., Oraee, H., and McMahon, R., “Electromagnetic-Thermal Design Optimization of the Brushless Doubly-Fed Induction Generator”, IEEE Transactions on Industrial Electronics, Vol.61, April 2014, pp. 1710-1721.
[24] Gorginpour, H., Jandaghi, B., Oraee, H., and Abdi, E., “Magnetic Equivalent Circuit Modeling of Brushless Doubly-Fed Induction Generator”, IET Renewable Power Generation, Vol. 8, No.3, April 2014, pp.334-346.
[25] Sheikhi, A., Bahrami, Sh., Ranjbar, A.M., and Oraee, H., “Strategic charging method for plugged in hybrid electric vehicles in smart grids; a game theoretic approach”, Electrical Power and Energy Systems, Vol.53, December 2013, pp. 499-506.
[26] Ebrahimi, S., Khazaeli, F., Tahami, F., and Oraee, H., “An Innovative Isolated Bidirectional Soft-Switched Battery Charger for Plug-In Hybrid Electric Vehicle”, International
Review on Modelling and Simulations, IREMOS, Vol.6, No.6, December 2013, pp.402-412.
[27] Gorginpour, H., Oraee, H., and McMahon, R., “A Novel Modeling Approach for DesignStudies of Brushless Doubly-Fed Induction Generator Based on Magnetic Equivalent Circuit”, IEEE Transactions on Energy Conversion, Vol.28, No.4, December 2013, pp.402-412.
[28] Tohidi, S., Oraee, H., Zolghadri, M., Shao, S., and Tavner, P., “Analysis and enhancement of low voltage ride-through capability of brushless doubly fed induction generator”, IEEE Transactions on Industrial Electronics, Vol.60, No.3, March 2013, pp. 1146-1155.
[29] Gorginpour, H ., Jandaghi, B., and Oraee, H., “A Novel Rotor Configuration for Brushless Doubly-fed Induction Generators”, IET Electric Power Applications, Vol. 7, No. 2, February 2013, pp. 106-115
[30] Sheikhi, A., Ranjbar, A.M., and Oraee, H., “ Financial analysis and optimal size and operation for a multicarrier energy system”, Energy and Buildings, Vol.48, May 2012, pp. 71-78.
[31] Barati, F., Shao, S., Abdi, E., Oraee, H., and McMahon, R., “Generalized vector model for the brushless doubly-fed machine with a nested loop rotor”, IEEE Transactions on Industrial Electronics, Vol.58, No.6, June 2011, pp. 2313-2321.
[32] Gorginpour, H., Oraee, H., and McMahon, R.A., “Performance Description of Brushless Doubly-Fed Induction Machine in its Asynchronous and Variable Speed Synchronous Modes ", Journal of Electromagnetic Analysis and Applications (JEMAA), Vol.3, No.12, December 2011, pp. 490-511.
[33] Sheikhi, A., Ranjbar, A., Oraee, H., and Moshari, A., “Optimal Operation and Size for an Energy Hub with CCHP ", Energy and Power Engineering (EPE), Vol.3, No.5, November 2011, pp. 641-649.
[34] Ahmadian, M., Jandaghi, B., and Oraee, H., “Maximum Torque per Ampere Operation of Brushless Doubly Fed Machines”, Renewable Energies and Power Quality Journal (RE & PQJ), ISSN: 2172-038X, 2011.
[35] Ahmadian, M., Jandaghi, B., and Oraee, H., “Hysteresis Loss in Brushless Doubly Fed Induction Machines”, Renewable Energies and Power Quality Journal (RE & PQJ), ISSN: 2172-038X, 2011.
[36] Arabian-Hoseynabadi, H., Oraee, H., and Tavner, P.J., "Wind turbine productivity considering electrical subassembly reliability", Renewable Energy, Elsevier, Vol.35, Issue 1, January 2010, pp.190-197.
[37] Arabian-Hoseynabadi, H., Oraee, H., and Tavner, P.J., "Failure Modes and Effects Analsis (FMEA) for Wind Turbines", International Journal of Electrical Power and Energy
Systems, Vol.32, Issue 7, September 2010, pp.817-824.
[38] Arabian-Hoseynabadi, H., Oraee, H., and Tavner, P.J., "Reliability Comparison of Direct-drive and Geared-drive Wind Turbine Concepts", Wind Energy, July 2009.
[39] Gorgin, H., Sotodeh, P., and Oraee, H., “Dynamic Model for Brushless Doubly-Fed Machine with Stator Winding Faults", International Review of Electrical Engineering (IREE), Vol.4, No.6, November-December 2009.
[40] Gorgin, H., Sotodeh, P., and Oraee, H., "Effects of Skewing on Torque for Brushless Doubly-Fed Machine", International Review of Electrical Engineering (IREE), Vol.4, No.6, November-December 2009.
[41] Oraee, H., Kaboli, Sh., Bahrani, B., Raissi, V., and Naghashan, M.R., "The effects of blockage of water cooled ventilating ducts in the stator coils of Isfahan power station generators", Electrical Research Journal, Ministry of Energy, No.46, 2006, (in Persian).
[42] Oraee, H., Kaboli, Sh., Bahrani, B., Raissi, V., and Naghashan, M.R., " Investigation of the effects of interturn failures in the stator coils of Isfahan power station generators", Electrical Research Journal, Ministry of Energy, No.46, 2006, (in Persian).
[43] Amini-Valashani, and Oraee, H., "Design Optimization of Brushed Permanent Magnet DC Motors by Artificial Neural Networks", Journal of Engineering, Chamran University, Vol. 4, Winter 2005, (in Persian).
[44] Amini-Valashani, S. and Oraee, H. ,"Design Optimization of Brushed Permanent Magnet DC Motors", Journal of Electrical Science and Technology, Vol. 33, 2002 (in Persian).
[45] Sargolzaei, N., Oraee, H. and Barkeshli, K., "A General Methodology for Electromagnetic Shape Optimization Problems using Automatic Adaptive Remeshing", Electromotion, Vol. 8, No. 3, Sept 2001, pp. 145-153.
[46] Ghafoori-Fard, H. and Oraee, H., "Thermal modelling of small transformers", Science & Engineering Journal, Vol. 10, No. 1, 2001, pp. 44-50.
[47] Oraee, H., "A Quantative Approach to Estimate the Life Expectancy of Electric Motors", IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 7, No. 6, Dec. 2000, pp. 790-796.
[48] Oraee, H., "Comparison of Sequential Unconstrained Minimization Technique and Genetic Algorithm in Design Optimization of Brushed PMDC Motors", Electromotion, No. 3, 2000, pp. 157-162.
[49] Oraee, H. and Emanuel, A.E., "Induction Motor Useful Life and Power Quality", IEEE Power Engineering Review, Vol. 20, No. 1, Jan, 2000.
[50] Oraee, H., "Economic Analysis of High Efficiency Electric Motors", Science & Engineering Journal, Vol. 9, No. 1, 2000, pp. 123-127.
[51] Oraee, H., "Design of 3 Phase Induction Motors Using Neural Networks", International Journal of Engineering Science, No. 11, Winter 2000, pp. 35-48, (in Persian).
[52] Oraee, H., "Optimization of Electric Motor Design Using Genetic Algorithm", International Journal of Engineering Science, Vol. 11, No. 1, 2000, pp. 13-21.
[53] Oraee, H., "On the Reduction of Stray Load Losses in 3 Phase Induction Motors", Electromotion, Vol. 5, No. 2, 1998.
[54] Oraee, H., "Prediction of Transient Behavior of Induction Motors Following Short Supply Interruptions" , Electromotion, Vol. 5, No. 4, 1998.
[55] Oraee, H., "Analysis of 3 Phase Induction Motors with Different Rotor Shapes and Sizes", Electrical Research Journal, Ministry of Energy, No. 23, 1997, (in Persian).
[56] Oraee, H., "Numerical determination of skin-effect factors and their influence on starting performance of cage induction motors", Electromotion, Vol. 3, No. 3, 1996.
[57] Oraee, H., "A design program for brushed permanent-magnet DC motors", Electromotion, Vol. 1, No. 1, 1994.
[58] Oraee, H. and Hashemi, A., "Design of an AVR with improved performance", Scientific & Industrial Research Journal, Vol. 10, No. 22, 1992 (in Persian).
[59] Oraee, H., "A Review of Industrial Research Activities in Iran", Baranoush Quarterly Journal, Vol. 1, No. 4, UK, 1992.
[60] Oraee, H. and Hashemi, A., "Application of optimization techniques in the design of 3-phase induction motors", Engineering Journal of Ferdowsi University, Vol. 3, No. 2, 1991 (in Persian).
[61] Oraee, H., and Haerian, A., "Manpower Constraints in the Industrial Recovery of Post-War Iran", Science, Technology and Development Journal, Vol. 9, Nos. 1 & 2, Frank Cass, UK, 1991.
[62] Oraee, H., "An Introduction to Computer-Aided Design of Electrical Machines", Engineering Journal of Ferdowsi University, Vol. 2, No. 3, 1990.
[63] Oraee, H. and McLaren, P. G., "Surge Voltage Distribution in Line-End Coils of Induction Motors", IEEE Trans., Vol. PAS-104, No. 7, July 1989.
[64] McLaren, P. G. and Oraee, H., "Multiconductor transmission line model for the line-end coils of large ac machines", Proc. IEE, Vol. 123, pt. B, No. 3, May 1985.
>>Social & Cultural Activities<<
Prof. Oraee is active in writing books, newspapers articles and editorials as well as delivering talks and taking part in various television and radio programs related to economic and social issues in Iran. He has recently published two books on current affairs which has proved to be highly popular. The books and articles can be reached at www.irwea.org.
For further information please contact Prof. Oraee.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Sharif University Of Technology
Department of Electrical Engineeirng Sharif University of Technology
Office: 6th Room - 624
Tel: (+98 21) 66165940
Fax: (+98 21) 66023261
Email: Oraee@sharif.ir